Choose Your Own Language

Mobile Tips and Tricks Part1 100% working




This trick is use in android mobile

A. process  =          *#7353#           will access the Device Diagnostic Tool on Samsung phones and some other Smartphones.this will be work to test
1. melody 2. vibration  3. speaker   4. dimming    5. camera   6. vt camera  
7. bluetooth   8. tsp dot mode   9. tsp grid mode   10. accelerometer sensor

B. Process =   *#06# shows the IMEI number of your phone.
The IMEI number is a unique number for your phone 15 digit number basically the Social Security number of your phone. Sometimes when typing in *#06# it will add an additional 2 digits at the end. The first 15 digits shown before any space or dash is your IMEI.

C. process =   *2767*3855# is a code to perform a VERY THOROUGH complete wipe on a Samsung phone. Never type in this code until you backup your entire phone's data, It will erase all personal data and settings. Factory Data Reset on your Smartphone and it didn’t solve your issue then this code might be exactly what you’re looking for.

D. process =  *983*57# can be used to Factory Data Reset some Android devices.

E. process = *#0*# will pull up the Device Diagnostic Tool Android 2.1 OS (Operating System).
F. process = *3282# or *DATA# to check data usage on AT&T phones.
G. Porcess = *646# or *MIN# to check minutes on an AT&T cell phone.
H. Process = #646 or #MIN Checks the current month's unbilled airtime usage on Verizon phones.
I. process= *225# Shows Bill Balance on AT&T mobile phones.
j. Process= *729# accesses a Bill Pay option on AT&T Phones.
K. Process= *639# can be used to check upgrade eligibility on an AT&T phone.
L. Process = *#*#7780#*#* is an alternate code to perform a Factory Data reset on some Android Smartphones. Don’t do this unless you’ve backed up your phone so you don’t lose anything. Once you type in this code the phone will show the option to erase the memory on the device and provide the option to format the SD card as well. Note: In order to finish the reset you will have to tap the “Reset phone” button shown on the screen.
M. Porcess= *#7380# is a soft reset code to restore the phones original factory default settings (just settings not a full clear) on Nokia mobile phones.
N. Porcess= *#7370# is a hard reset on Nokia phones, this restores the whole phone, not just the settings, so make sure you do a backup first, if possible.
O. Porcess= *#*#34971539#*#* this code can be used to get information about your phone’s camera. It shows following: Update camera firmware in image (Don't try this option because it will most likely break your phone)
            Get firmware update count
            Get camera firmware version
            Update camera firmware in SD card
P. Process= *#1234# displays software/firmware information.
Q. Process= *#*#7594#*#* this code can be used to change the "End Call/Power" option on your phone. So instead of having to select the Silent mode, Air Plane mode or Power off, you can just use the power key to power the phone right off.
R. process= *#*#232339#*#* or *#*#526#*#* or *#*#528#*#* - Wireless LAN (WLAN) test. Just use the phones "Menu" button to start the various tests).

R. Process= *#*#232338#*#* Shows the Wireless LAN (WLAN) MAC address WiFi and can show “power save mode Settings”.
S. Process= *#*#273283*255*663282*#*#* will open a file manager of sorts where you can backup your media files such as Images, M3 (Sound), Video and Voice memos.

T. Process= *#*#197328640#*#* opens a Service Mode where you can run various tests such as debugging the screen, gather version information etc.
U. More processes here
*#*#1472365#*#* or *#*#1575#*#* will allow you to access a GPS test.
*#*#232331#*#* pulls up a Bluetooth test screen.
*#*#232337#*# Shows the Bluetooth Device Address.
*#*#7378423#*#* or *#*#SERVICE#*#* Sony Battery Health test
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate.
*#*#1234#*#* - PDA and Phone.
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number.
*#*#3264#*#* pulls up the RAM version.
*#*#2222#*#* shows the FTA HW Version.
*#*#1111#*#* shows the FTA SW Version.
V. Process= ##21# This will cancel your phones registration from your service provider network and should allow you to connect to the closest tower in your area. Once you type in the code you will have to actually call it, it will show a message and then go through… try and make a call or two and see if the service has improved. If yes enjoy, if not then power cycle your phone (turn it off and then back on). I don’t usually recommend this code be used unless you’re having pretty constant network related issues. If for some reason you have minimal service after entering this code and you have tried restarting your phone then you might have to contact your wireless provider to get them to reconnect you to the network (which power cycling should do for you), just call in and let them know that you suddenly had no service, should be one of the standard things they check for service related issues, just have them send an OTA (Over The Air Activation) to your phone (so far only confirmed on AT&T phones).

W. Porcess= *#*#0283#*#* can check the Packet Loopback for networking.
X. Process= *#*#0*#*#* - run a LCD test on your screen.
Y Process= *#*#0673#*#* OR *#*#0289#*#* is how you run a Melody test for checking the sound. I believe this one is for the external speaker (the speaker that plays music on the phone).
Z. Process= *#*#0842#*#* Device test (vibration test and back light test).
AA. Process= *#*#2664#*#* Touch Screen test for if you think you might have dead spots or areas that don’t respond on the screen.
AB. Process= *#*#2663#*#* to show the Touch Screen version.
AC Process= *#*#0588#*#* is a Proximity Sensor Test. The proximity sensor is a small little sensor, usually on the top of the phone next the logo or speaker you hold up to your ear, and its purpose is to know when you put your phone to your ear, so that the phone will lock, and you won’t accidently press keys when talking to other people. It then is supposed to realize when you’re removing your phone from your ear so that it can show the display again. If your phone is remaining on a black screen and you’re having issues ending calls then it could be your proximity sensor.
AD. Process= *3001#12345#* opens a Field Test on iPhones. You’ll have to press dial/call for this code to go through. This code opens a lot of different options to go through and see how well or efficiently your iPhone is working. One such future shown includes your phones signal. After typing this code into the phone the signal bars actually turn into a number. The lower the number the worse your signal strength is. Remember the number is a negative so -90 is a worse signal strength on your phone than a -80. Using this code can access a ton of technical information on an iphone, once done going through what you want then just press your home key to exit the Field Test.
AE. Process= *777# then call/dial, should open the account balance on a prepaid iPhone.
AF. Process = *#61# can be used to check the number for unanswered calls on iPhone. Use the code
AG. Process= *#62# if you don’t have any service currently available. *#67# if the iPhone is busy.
AH. Process= *#21# provides information on call forwarding options.
AI. Process= *#119# or #*119# is supposed to help take a phone out of Emergency Mode. (submitted by a Sprint employee)
AJ. Process= *#30# should show whether the phone has the setting to display its caller ID field enabled or disabled (I have yet to confirm this code. I think it is primarily for iPhones). *#76# is a similar code.
AK. Process= *#33# can be used to check for call control bars on an iPhone.
AL. Process= *#43# shows whether call waiting is enabled or disabled on iPhone.
AM. Process= *3001#12345#* iPhone Field Test Mode.


Collected By . Mr. Tekendra Prasad Shah [Rajbiraj, Saptari Nepal] +977-9842833695

Mobile Tips and Tricks Part2 100% working

Post a Comment